One stop electronic component supply Original ZB25VQ16CTJG 3V 16M-BIT SERIAL NOR FLASH WITH DUAL AND QUAD SPI SOP8

Product Descriptions

The ZB25VQ16C of non-volatile flash memory device supports the standard Serial Peripheral Interface (SPI). Traditional SPI single bit serial input and output (Single I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit (quad I/O) serial protocols. This multiple width interface is called SPI Multi-I/O or MIO.

The SPI protocols use only 4 to 6 signals:

• Chip Select (CS#)

• Serial Clock (CLK)

• Serial Data

- IO0 (DI)

- IO1 (DO)

- IO2 (WP#)

- IO3 (HOLD#)

The ZB25VQ16C support the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI : Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (WP#), and I/O3 (HOLD#). The clock frequencies are supported allowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and 532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O. These transfer rates can outperform standard synchronous 8 and 16-bit Parallel Flash memories.

A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device ID and SFDP Register, a 128-bit Unique Serial Number and three 256-bytes Security Registers.

The ZB25VQ16C provides an ideal storage solution for systems with limited space, signal connections, and power. These memories' flexibility and performance is better than ordinary serial flash devices. They are ideal for code shadowing to RAM, executing code directly (XIP), and storing reprogrammable data.

Product Features

• Power Supply Voltage 

- Single 2.3V-3.6V supply

• 16M bit Serial Flash 

- 16 M-bit/2048K-byte/8,192 pages

- 256 bytes per programmable page

- Uniform 4K-byte Sectors, 32K/64K-byte Blocks

• New Family of SPI Flash Memories 

- Standard SPI: CLK, CS#, DI, DO, WP#, HOLD#

- Dual SPI: CLK, CS#, DI, DO, WP#, HOLD#

- Quad SPI: CLK, CS#, IO0, IO1, IO2, IO3

- Software Reset

- Auto-increment Read capability

• Temperature Ranges 

- Industrial (-40°C to 105°C)

- Industrial (-40°C to 125°C)

• Low power consumption 

- 10 μA typical standby current

- 1 μA typical power down current

• Efficient “Continuous Read” and Quad Read 

- Continuous Read with 8/16/32/64-Byte Wrap

- Quad Peripheral Interface reduces instruction overhead

• Flexible Architecture with 4KB sectors 

- Sector Erase (4K-bytes)

- Block Erase (32K/64K-bytes)

- Page Program up to 256 bytes

• Endurance and Data Retention 

- More than 100K erase/program cycles

- More than 20-year data retention

• Advanced Security Feature 

- Software and Hardware Write-Protect

- Power Supply Lock-Down and OTP protection

- Top/Bottom, Complement array protection

- 128-Bit Unique ID for each device

- Serial Flash Discoverable Parameters (SFDP) Register

- 3X256-Byte Security Registers with OTP locks

- Volatile & Non-volatile Status Register Bits

• High performance program/erase speed 

- Page program time: 250us typical

- Sector erase time: 45ms typical

- Block erase time: 150ms typical

- Chip erase time: 3s typical

• Package Options 

- SOP8 - 150mil/208mil

- TFBGA24

- TSSOP8 - 173mil

- DFN8 (4*3*0.55mm)

- DFN8 (2*3*0.55mm)

- All Pb-free packages are RoHS compliant

​

  Specifications

Actual product photos

Payment&Transportation

Official Certificate&Certificate

Multiple product supply

Company office environment

Warehouse Real Shot

Standard packaging

We also provide ：