Free hotline:
86-755-88844016
+852 2632 9637
Image shown is a representation only.
Exact specifications should be obtained from the product data sheet.
Hot selling one-stop electronic component E22-400T22S LoRa spread spectrum UART/SX1268 RF low power consumption
E22-400T22S is a wireless serial port module (UART) based on SEMTECH's SX1268 RF chip.
Product Descriptions
E22-400TXXX series is a new generation of LoRa wireless module. It is a wireless serial port module (UART) based on SX1268 RF chip, with a variety of transmission methods, working in (410.125 ~ 493.125MHz) frequency band (default 433.125MHz), LoRa spread spectrum technology, with TTL level output, support 2.3V - 5.5V supply voltage. E22-400TXXX adopts a new generation of LoRa spread spectrum technology. Compared with the traditional SX1278 solution, SX1268 has farther range, faster
transmission speed, but with lower power consumption and smaller size;
It supports wake-up over the air, wireless configuration, LBT, automatic relay, communication key and other functions. It also supports packet length setting, and customized development service is available.
Product Applications
• Home security alarm and remote keyless entry;
• Smart home and industrial sensors;
• Wireless alarm security system;
• Building automation solutions;
• Wireless industrial-grade remote control;
• Health care products;
• Advanced Meter Reading Architecture (AMI);
• Automotive industry applications.
Product Features
• Based on chip SX1268, the new LoRa spread spectrum modulation technology brings a longer communication distance and stronger anti-interference ability;
• Support automatic relay networking, multi-level relay is suitable for ultra-long-distance communication, and multiple networks can run simultaneously in the same area;
• User can set the communication key by himself and the key cannot be read by others. It greatly improving the confidentiality of user data;
• Support LBT function, monitoring the channel environment noise before sending data, which greatly improves the communication success rate of the module in harsh environments;
• Support RSSI signal strength indicator function for evaluating signal quality, improving communication network, and ranging;
• Support wireless parameter configuration, send command packets wirelessly, remotely configure or read wireless module parameters;
• Support wake-up over the air, that is ultra-low power consumption, suitable for battery-powered applications;
• Support point to point transmission, broadcast transmission, channel listening;
• Support deep sleep, the power consumption of the whole module is about 2uA in this mode;
• Support global license-free ISM 433MHz frequency band, support 470MHz meter reading frequency band;
• The module has built-in PA+LNA, and the communication distance can reach 16km under ideal conditions;
• The parameters are saved after power-off, and the module will work according to the set parameters after power-on;
• Efficient watchdog design, once an exception occurs, the module will automatically restart and continue to work according to the previous parameter settings;
• Support 2.4k~62.5kbps air data rate transmission;
• Support 2.3~5.5V power supply, power supply greater than 3.3V guarantees the best performance;
• Industrial standard design, supporting long-term use at -40~+85℃;
• The maximum power of the module can reach 2W (33dBm), which makes the transmission farther and more stable.
Specifications
Attribute | Attribute value | Notes |
ANSM-Part# | ANSM-E22-400T22S | |
Operating frequency | 410.125~493.125MHz | Support ISM band |
Tx power | 22 dBm | Maximum power (approximately 160mW) |
Receiving sensitivity | -147dbm | Air data rate is 2.4kbps |
Air data rate | 0.3k~62.5kbps | Controlled via user’s programming |
Distance for reference | 5500m | Test condition:clear and open area, antenna gain: 5dBi,antenna height: 2.5m,air data rate: 2.4kbps |
Size | 16 * 26 mm | - |
Antenna | IPEX/stamp hole | 50 ohm impedance |
Communication interface | UART | - |
Package | SMD | - |
Power supply voltage (V) | 2.3-5.5 | |
Emission current (mA) | 110 | 22dBm (160mW) |
Received current (mA) | 11 |
Actual product photos
Product Data Book:
For more product information, please download the PDF