Free hotline:
86-755-88844016
+852 2632 9637
Image shown is a representation only.
Exact specifications should be obtained from the product data sheet.
wireless transmitting Qi 5W wireless receiving mobile power USB output triple wireless transmitting and receiving PCBA
Manufacturer Product Number
ATMR5W-FR3in1
Description
wireless transmitting Qi 5W wireless receiving mobile power USB output triple wireless transmitting and receiving PCBA
Product descriptions from the supplier
Qi5w wireless transmitting 5W wireless receiving mobile power USB output triple wireless transmitting and receiving PCBA(Accept customization)
Product Description
| Sketch: |
| The module has built-in Qi standard receiving module, which can charge the built-in battery through Qi standard transmitter. At the same time, the electromagnetic induction principle can be used to charge the Qi standard receiver wirelessly. It has good compatibility for 5W wireless chargeable mobile phones. It can support Ti, IDT, Panasonic and other Qi standard receivers. |
| 2.2 rated parameters | |||||
| Test conditions: ambient temperature 25 ° C. | |||||
| Test conditions | Rating | Inimum value | Maximum | Company | |
| Power consumption in standby mode | VCC = 5V, no load | Zero point seven four | Zero point five | One | mW |
| Working frequency | Adjust load and distance | / | One hundred and five | Two hundred and five | KHz |
| Transmission efficiency | VCC = 5V, bq51013xevm test | Seventy | Fifty | Seventy-six | % |
| Working voltage | 5W output | Five | Four point five | Five point five | V |
| Wireless output power | Fast mode | Five | Four point five | Five | W |
| USB output power | Constant voltage 4.75V | Ten point five | Ten | Twelve | W |
| Working distance | Bq51013xevm test | Six | One | Eight | mm |
| 3. Mechanical specifications | |
| 3.1 basic parameters | |
| PCB board size | 69*34*1.0mm |
| Component thickness on PCB | 3.9mm |
| Coil length | 15mm |
| Disk size | 49.5*49.5*1mm |
| Function and number: | |
| Product model: | Wireless transmission without interface protection cover, receiving PCBA with battery |
| Main functions: | Charge the built-in 8000mah battery through the back 5V / 1A wireless reception, charge the mobile phone through the front 5W Qi transmission, and charge the 5V / 2A cable via USB output |
| Standard Version: | WPC-1.2.4 |
| Product application: | Qi compliant wireless charger |
| Charging type: | One to one charging in corresponding area |
| DC5V1A | |
| 6-8mm | |
| Charging current: | 1000mA |
| Transmitting power: | 5W |
| Working frequency: | 100-205KHz |
| Power conversion: | More than 75% |
| Charging mode: | Induction mode |
| Battery capacity: | 8000mAh |
| Power indication: | 1-4 LEDs |
| USB input: | 5V/2A |
| MICRUSB: | 5V/2A IN |
| Press the key to start the wireless charging |
About us
Exhibition
Advantages
FAQ
Other Products In The same category:
wireless transmitting Qi 5W wireless receiving mobile power USB output triple wireless transmitting and receiving PCBA
No stock
Can ship immediately