Image shown is a representation only.

Exact specifications should be obtained from the product data sheet.

MAX3161EAG+ 2/2 Transceiver Full RS232, RS422, RS485 24-SSOP

Manufacturer
Manufacturer Product Number
MAX3161EAG+
Description

Maxim Integrated MAX3161EAG+ Driver 2/2 Drivers/Receivers 24 Pin 24 Terminations Drivers Interface ICs

Package Condition
Tube

Product Details

MAX3161EAG+ Overview


This driver chip is excellent for driving common LEDs due to its enhanced 24-SSOP (0.209, 5.30mm Width) package.The package of this receiver is Tube.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 3V~5.5V from the power supply to run this differential driver.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.IC receiver is designed for applications with a temperature of -40°C~85°C.Driver ICs in this category can operate efficiently with a supply voltage range of 3.3V.Wide receiver has 24 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 24-pin layout that follows the market standard.Since the base part number MAX3161 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.24-pin driver IC with improved power dissipation control.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.As a general rule, this receiver has a resolution of 2 bits that is usually specified.There is one driver IC that is designed to operate from a 3.3/5V power supply, and only one driver IC in total.There are 1 transceivers in total implemented by this IC.On the part, 2 drivers are embedded in order to facilitate the operation of the device.To power the ic receiver, sufficient current but not more than 5.5mA should be supplied to its VCC pin.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 2.5mA.At 3V, Wide receiver is able to deliver voltage to the load.In this bluetooth transceiver, the output current is rated at 25μA.

MAX3161EAG+ Features


Tube package
24 pin count
24 pins
3.3/5V power supply


MAX3161EAG+ Applications


There are a lot of Maxim Integrated
MAX3161EAG+ Drivers/Receivers/Transceivers applications.


  • Cordless telephone
  • Desktop PC
  • Notebook
  • Pocket PC
  • Desktop radio
  • Clock radio
  • Tuner
  • Portable radio
  • Car radio
  • Satellite radio receiver

Product Description

24-SSOP

ansc Part #  ANSC-  MAX3161EAG+
Part#  MAX3161EAG+
Type: Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers
Manufactor MAXIM
DC new
Package / Case SSOP24
Supplier Device Package Tube
Description IC TRANSCEIVER FULL 2/2 24SSOP

Actual product photos

17380.jpg

Specifications

TYPE DESCRIPTION
Category Integrated Circuits (ICs)
Interface
Drivers, Receivers, Transceivers
Mfr Analog Devices Inc./Maxim Integrated
Series -
Package Tube
Product Status Active
Type Transceiver
Protocol RS232, RS422, RS485
Number of Drivers/Receivers 2月2日
Duplex Full
Receiver Hysteresis 500 mV
Data Rate 10Mbps
Voltage - Supply 3V ~ 5.5V
Operating Temperature -40掳C ~ 85掳C
Mounting Type Surface Mount
Package / Case 24-SSOP (0.209", 5.30mm Width)
Supplier Device Package 24-SSOP
Base Product Number MAX3161

Product Data Book

For more product information, please download PDF: MAX3161EAG+

Payment&Transportation

Official Certificate&Certificate

Standard packaging

Multiple product supply

Welcome to visit our company

Warehouse Real Shot

Related Hot Deals

Write your review

MAX3161EAG+ 2/2 Transceiver Full RS232, RS422, RS485 24-SSOP

Maxim Integrated MAX3161EAG+ Driver 2/2 Drivers/Receivers 24 Pin 24 Terminations Drivers Interface ICs

Write your review

Other Products In The same category:

50In stock:
Can ship immediately
QUANTITY
All prices are in USD

SEND
RFQ