Hot selling E18-MS1-IPX cheap price 1km zigbee IOT Wireless communication module 2.4g Zigbee Cc2530 Module

Product Descriptions

E150-400T30S is a wireless serial port module (UART) based on LoRa radio frequency chip. It works in the frequency band of 410.125~493.125MHz (default 433.125MHz) and adopts LoRa spread spectrum technology.

The module integrates (switch input) DI, (switch output) DO, (digital-to-analog converter) ADC, (analog-to-digital converter) DAC, (pulse width modulation) PWM and (remote radio) LoRa and other functions, users can Send Modbus RTU command

to control through serial port or remote LoRa networking device, and also support low power consumption mode. The module supports the function of LoRa direct sequence spread spectrum technology, which has the advantages of longer 

communication distance, strong anti-interference ability, and strong confidentiality. 

The module's factory default air rate is 2.4kbps, and the transmit power is 30dBm. The PA power amplifier and LNA low noise amplifier are integrated inside, thereby improving communication stability and extending communication distance;

industrial-grade passive crystal oscillator is used to ensure its stability and consistency . 

Product Features

 Support advanced LoRa modulation method, with the advantage of long-distance anti-interference;

 Built-in PA+LNA, the communication distance can reach 10km under ideal conditions, and the transmission distance is better than traditional GFSK;

 Support air wake-up (ultra-low power consumption), suitable for battery applications;

 The maximum transmit power is 1W, and the software can be adjusted in multiple levels;

 Support global license-free ISM 433MHz frequency band, frequency range: 410.125 ~ 493.125MHz, channel spacing 1MHz;

 Support data transmission rate of 2.4k～62.5kbps;

 Support 3.3~5.2V power supply, and the best performance can be guaranteed if the power supply is greater than 5V;

 Support standard Modbus RTU protocol;

 Support various configuration software/PLC/touch screen;

 4-way switch input DI;

 4-way switch output DO (DO1, DO2 open-drain output, DO3, DO4 push-pull output);

 5-channel 12-bit ADC channel acquisition (2-channel voltage acquisition, 1-channel power supply voltage acquisition and 2-channel current acquisition);

 2-channel 8-bit DAC output, only supports floating-point voltage value output;

 2-channel PWM output, frequency range 25 Hz ~ 65535 Hz, multi-level duty cycle adjustable;

 Support 1~247 Modbus address settings, 0 is the public address;

 Support sending non-local Modbus addresses to other networked LoRa devices;

 Support transparent transmission of non-Modbus commands;

 UART to RS485 control pin (external conversion chip is required);

 Support 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 and other baud rates;

 Support low power consumption mode;

 Support direct access of E22 series modules;

 Using industrial-grade crystal oscillator, industrial-grade standard design, support long-term use at -40~ +85 ℃;

 IPEX interface, external antenna can be installed. 

Product Application

 Application of industrial PLC Modbus RTU;

 Smart home and industrial sensors, etc.;

 Wireless alarm security system;

 Building automation solutions;

 Wireless industrial grade remote control;

Specifications

Actual product photos

Product Data Manual：

For more product information, please download the PDF

Payment&Transportation

Official Certificate&Certificate

Multiple product supply

Company office environment

Warehouse Real Shot

Standard packaging