Image shown is a representation only.
Exact specifications should be obtained from the product data sheet.
Programming serial interface module chip AD9833 sine wave signal generator DDS module GY-9833
Manufacturer
Manufacturer Product Number
GY-9833
Description
Programming serial interface module chip AD9833 sine wave signal generator DDS module GY-9833
Package Condition
Original
Product Description
The AD9833 is a low power, programmable waveform generator capable of generating sine, triangle and square wave outputs. Generation is required in various types of waveform detection, implementation and time domain reflectometry (TDR) applications. The output frequency and phase are both software programmable and can be easily adjusted. No external components are necessary. The frequency register is 28 bits wide: with a clock frequency of 25 MHz, a resolution of 0.1Hz can be achieved; with a clock frequency of 1 MHz for the AD9833, a resolution of 0.004Hz can be tuned
The AD9833 has a standard serial interface that allows the device to be directly connected to different microprocessors. The device uses an external serial clock to write data or information to the control device
The AD9833WBRMZ-REEL model is available to meet the quality and reliability needs of automotive applications through control. Please note that the automotive specifications of this model may differ from the commercial model; therefore, designers must carefully read the specific sections of this data sheet. Only automotive grade indicated products can be used in automotive applications. Please contact your local Analog Devices representative account for specific product ordering information and to obtain specific automotive reliability reports for these models
The AD9833 is written to via a serial interface line. This serial interface operates at clock frequencies up to 40 MHz and is standard compatible with DSPs and microcontrollers. The device is powered from a 2.3 V 5.5 V supply
The AD9833 has a power-down feature (SLEEP). This allows unused parts of the device to be turned off, minimizing power consumption, for example, the DAC can be turned off when generating the output clock
Product Features
Digitally programmable frequency and phase
12.65 mW 3 V power consumption
0 MHz to 12.5 MHz output frequency range
Bit resolution: 0.1Hz to 25 MHz reference clock
Sine, triangle and square wave outputs
2.3 V to 5.5 V power supply
No external components required
SPI interface line
Extended temperature range: 6 140°C to +105°C
Power-off option
Update frequency: 25 (max)
VOUT maximum: 0.65 V
Minimum VOUT: 38mV
VOUT temperature coefficient: 200°
High voltage input: 1.7-2.8 V
Low voltage input: 0.5-0.7 V
Input current: 10µA
Entry capacitance: 3pF
Operating temperature is 6 140°C to +105°C; typical specifications are at 25°C
Size: 17*12mm/ 0.66*0.47"
Quantity: 1 piece
This package includes:
1 signal generator module
Actual image of the product
Company Information
Other Products In The same category:
Programming serial interface module chip AD9833 sine wave signal generator DDS module GY-9833
1000In stock:
Can ship immediately