Free hotline:
86-755-88844016
+852 2632 9637
Image shown is a representation only.
Exact specifications should be obtained from the product data sheet.
E32-900T30D Wireless Serial Port Transmitter LoRa Modulation 30dBm 868/915MHz 1W CDEBYTE Antenna DIP 8km SX1276
E32-900T30D is a wireless serial port module (UART) based on SEMTECH’s SX1276 RF chip.
Product Descriptions
E32-900T30D is a wireless serial port module (UART) based on SEMTECH’s SX1276 RF chip. It has multiple transmission modes, working in the 862MHz~931MHz, LoRa spread spectrum technology, TTL output.
SX1276 features LoRa™,which will bring longer communication distance, and has the advantages of concentrated power density, meanwhile it has a very strong confidentiality.The modules of 30dBm transmitting power adopt industrial grade crystal
oscillators to ensure the stability and consistency with air data rate 2.4kps. It is widely applied in utility meters, IoT renovation, smart home, etc. The modules feature data encryption and compression.
E32-900T30D strictly follows design standards of FCC, CE, CCC and meets various RF certification requirements for exporting.
Product Applications
• Home security alarm and remote keyless entry;
• Smart home and industrial sensors;
• Wireless alarm security system;
• Building automation solutions;
• Wireless industrial-grade remote control;
• Health care products;
• Advanced Meter Reading Architecture(AMI);
• Automotive industry applications.
Product Features
• Advanced LoRa modulation, with the advantage of long-distance anti-interference;
• Under ideal conditions, the communication distance can reach 8km, and the transmission distance is better than traditional GFSK;
• Fixed-point transmission, broadcast transmission, channel monitoring;
• FEC forward error correction to improve communication stability;
• Air wake-up (ultra-low power consumption), suitable for battery applications;
• Adopt industrial-grade active temperature-compensated crystal oscillator to ensure its stability and consistency;
• The maximum transmit power is 30dBm, and the software is multi-level adjustable;
• Support 868/915MHz EU general frequency band;
• The data transmission rate of 0.3k~19.2kbps;
• 3.3~5.5V power supply, power supply greater than 3.3V can guarantee the best performance;
• Industrial-grade standard design, supporting long-term use at -40~+85℃;
• IPEX/stamp hole interface for easy connection of coaxial cable or external antenna.
Specifications
Attribute | Attribute value | Notes |
ANSM-Part# | ANSM-E32-900T30D | |
Working frequency band (MHz) | 862-931 | |
Transmission power (dBm) | 30 | |
Distance for reference | 8kM | Test condition:clear and open area, antenna gain: 5dBi,antenna height: 2.5m,air data rate: 2.4kbps |
TX length | 58Btye | Maximum capacity of single package, automatic sub-packing after exceeding. |
Buffer | 512Btye | - |
Modulation | LoRa™ | - |
Communication interface | TTL | @3.3V |
Package | DIP | - |
Connector | DIP | 1*7*2.54mm spacing |
Size | 24*43 mm | - |
Antenna | SMA-K | 50 ohm impedance |
Generating current (mA) | 650 | Instantaneous power consumption |
Received current (mA) | 25 | |
Power supply voltage (V) | 3.3-5.5 | >55V ensures output power |
Actual product photos
Product Data Book:
For more product information, please download the PDF