Free hotline:
86-755-88844016
+852 2632 9637
Image shown is a representation only.
Exact specifications should be obtained from the product data sheet.
Original TPS63060DSCR Buck-Boost Switching Regulator IC Positive Adjustable 2.5V 1 Output 2A (Switch) 10-WFDFN Exposed Pad
TPS63060DSCR Buck-Boost Switching Regulator IC Positive Adjustable 2.5V 1 Output 2A (Switch) 10-WFDFN Exposed Pad
Product Details
DC DC Voltage Regulator Tape & Reel (TR) 10-Pin 10 Terminals TPS63060 2.4MHz Switching Regulator IC Chip
TPS63060DSCR Description
The TPS63060 devices provide a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. Output currents can go as high as 2 A while using a dual-cell Li-Ion or Li-polymer battery, and discharge to 5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power save mode to maintain high efficiency over a wide load current range. The power save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 2.25 A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load disconnects from the battery. The devices are available in a 3 mm × 3 mm, 10-pin, WSON (DSC) package.
TPS63060DSCR Features
-
Input voltage range: 2.5 V to 12 V
-
Efficiency: Up to 93%
-
Automatic transition between step down and boost mode
-
Typical device quiescent current: < 30 μA
-
Fixed and adjustable output voltage options from 2.5 V to 8 V
-
Power save mode for improved efficiency at low output power
-
Forced fixed-frequency operation at 2.4 MHz and synchronization possible
-
Power good output
-
Buck-Boost Overlap Control?
-
Load disconnect during shutdown
-
Overtemperature protection
-
Overvoltage protection
TPS63060DSCR Applications
-
Dual Li-ion application
-
Digital still cameras (DSC) and camcorders
-
Notebook computer
-
Industrial metering equipment
-
Ultra mobile PCs and mobile internet devices
-
Personal medical products
-
High-power LEDs
Product Description
ANSC PART# |
ANSC- TPS63060DSCR |
Part# |
TPS63060DSCR |
Type: |
Integrated Circuits |
Manufactor |
Texas Instruments |
DC |
new |
Actual image of the product
Product Attributes
TYPE |
DESCRIPTION |
---|---|
Category |
Integrated Circuits (ICs) Power Management (PMIC) Voltage Regulators - DC DC Switching Regulators |
Mfr |
Texas Instruments |
Series |
- |
Packaging |
Tape & Reel (TR) Cut Tape (CT) |
Part Status |
Active |
Function |
Step-Up/Step-Down |
Output Configuration |
Positive |
Topology |
Buck-Boost |
Output Type |
Adjustable |
Number of Outputs |
1 |
Voltage - Input (Min) |
2.5V |
Voltage - Input (Max) |
12V |
Voltage - Output (Min/Fixed) |
2.5V |
Voltage - Output (Max) |
8V |
Current - Output |
2A (Switch) |
Frequency - Switching |
2.4MHz |
Synchronous Rectifier |
Yes |
Operating Temperature |
-40°C ~ 85°C (TA) |
Mounting Type |
Surface Mount |
Package / Case |
10-WFDFN Exposed Pad |
Supplier Device Package |
10-WSON (3x3) |
Base Product Number |
TPS63060 |
Product datasheet
For more information, please download
Payment&Transportation
Official Certificate&Certificate
Standard packaging
Multiple product supply
Welcome to visit our company
Warehouse Real Shot