Image shown is a representation only.

Exact specifications should be obtained from the product data sheet.

Spot high-quality thickened open computer chassis dual server E-ATX/ATX motherboard bay

Manufacturer
Manufacturer Product Number
MK-01-ATX
Description
dual server E-ATX/ATX motherboard bay
Brand Meiji
model MK-01-ATX
Article number 101074030 
Applicable type Desktop computer
Case type Rack
Compatible motherboard ATX, FLEX, ITX, MicroATX, E-ATX
material quality 0.8mm steel plate baked with black paint
Standard power supply No standard power supply
Front interface nothing
size 44 * 25 * 3.5 (cm)
Product weight 1.2 (KG)
Packaging List Main board * 1pcs, rear board * 1pcs, side reinforced fixing board * 2pcs+screw accessory kit * 1 set
Chassis structure E-ATX/ATX/M-ATX/ITX
Chassis type server
Power position Upward

Model: MK-01 Standard Edition ATX Open Chassis

Material: High quality 0.8mm SPCC steel plate, surface painted with black sand grain paint;

Number of supported graphics cards: According to the motherboard situation, the length and width of the graphics card are not limited;

Support motherboard: support motherboards up to 305 * 245mm: ATX, Micro ATX, ITX;

Support power supply: standard ATX power supply, reference size 150mm * 86mm * (140-250) mm; Supports 1 SSD and 1 HDD;

Product size after installation: 440 * 265 * 128mm;

Basic logistics information

After installing the power supply, the size of the product is 440 * 265 * 160mm;

Net weight of product: 1.0KG

FAQ

Q: What is the weight of the product?

Answer: 1.2Kg

Q: What accessories does the product include?

Answer: 1 power on cable, 1 fixed motherboard backplane, 1 fixed IO, rear board for graphics and expansion cards, and 2 triangular reinforced side fixing plates; One set of fixing screws for the main board copper pillar, main board, power supply, graphics card, and hard drive;

Q: What motherboards and power supplies are supported by the ATX version of the motherboard;

Answer: Supports all ATX, M-ATX, and ITX motherboards; Support standard or extended ATX power supply;

Q: What motherboards does the E-ATX version of the motherboard support?

Answer: The E-ATX version can support the vast majority of E-ATX motherboards on the market, and some E-ATX motherboards may have 1-2 incorrect screw holes, It can be supported by the attached plastic base;

Q: Which graphics card is supported and how many graphics cards are supported?

Answer: All graphics cards are supported, regardless of length or width; The number of graphics cards needs to be determined based on the PCIE card slot on the motherboard and the thickness of the graphics card, usually 3-7 cards;

Q: Can a fan be installed?

Answer: Three 12cm fans can be installed on the other side of the base plate (if the graphics card is too long, it will cause interference and cannot be installed); It can also be used to install 120,240,360 water-cooled exhaust;

Q: What is the maximum height that the CPU heat sink can support?

Answer: The height of the CPU heat sink is not limited;

Write your review

Spot high-quality thickened open computer chassis dual server E-ATX/ATX motherboard bay

dual server E-ATX/ATX motherboard bay

Write your review

Other Products In The same category:

1944In stock:
Can ship immediately
QUANTITY
All prices are in USD

Factory packaging/ANSC packaging

Quantity Price You Save
2 $25.10 Up to $0.00

SEND
RFQ