Image shown is a representation only.

Exact specifications should be obtained from the product data sheet.

Hot-selling and scarce SN74LVC821APW 10-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS 24-TSSOP spot stock

Manufacturer Product Number
SN74LVC821APW
Description

SN74LVC821APW 10-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS 24-TSSOP spot stock

Package Condition
Tube
Datasheet
We are just Spot traders, Stockists, Sraders, PCBA&BOM service providers,Purchaser. All intellectual property rights of products on our website belong to the original factory! (In addition to ANSC's own customized products)

Product Descriptions

This 10-bit bus-interface flip-flop is designed for 1.65-V to 3.6-V VCC operation .

The  SN74LVC821A  features  3-state  outputs  designed  specifically  for  driving  highly  capacitive  or  relativelylow-impedance  loads .  This  device  is  particularly  suitable  for  implementing  wider  buffer  registers,  I/O  ports,bidirectional bus drivers with parity, and working registers .

The ten flip-flops are edge-triggered D-type flip-flops . On the positive transition of the clock (CLK) input, thedevice provides true data at the Q outputs .

A buffered output-enable (OE) input can be used to place the ten outputs in either a normal logic state (high orlow logic levels) or the high-impedance state . In the high-impedance state, the outputs neither load nor drive thebus lines significantly . The high-impedance state and increased drive provide the capability to drive bus lineswithout interface or pullup components .

OE does not affect the internal operations of the latch . Previously stored data can be retained or new data canbe entered while the outputs are in the high-impedance state .

Product Features

•     Operates From 1.65 V to 3.6 V

•     Inputs Accept Voltages to 5.5 V

•     Max t    of 7.3 ns at 3.3 Vpd

•     Typical VOLP (Output Ground Bounce)

<0.8 V at VCC = 3.3 V, TA = 25°C

•     Typical VOHV (Output VOH Undershoot)

>2 V at VCC = 3.3 V, TA = 25°C

•     Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC)

•     Ioff Supports Partial-Power-Down Mode Operation

•     Latch-Up Performance Exceeds 250 mA Per JESD 17

•     ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

Product Specifications

Attribute Attribute value
ANSM-Part# ANSM-SN74LVC821APW
Category Integrated Circuits (ICs)
Logic
Flip Flops
Manufacturer -
Series 74LVC
Packaging Tube
Part Status Active
Function Standard
Type D-Type
Output Type Tri-State, Non-Inverted
Number of Elements 1
Number of Bits per Element 10
Clock Frequency 150 MHz
Max Propagation Delay @ V, Max CL 7.3ns @ 3.3V, 50pF
Trigger Type Positive Edge
Current - Output High, Low 24mA, 24mA
Voltage - Supply 1.65V ~ 3.6V
Current - Quiescent (Iq) 10 µA
Input Capacitance 5 pF
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Supplier Device Package 24-TSSOP
Package / Case 24-TSSOP (0.173", 4.40mm Width)
Base Product Number 74LVC821

Product Photos

SN74LVC821APW

For more product information, please download the PDF

Write your review

Hot-selling and scarce SN74LVC821APW 10-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS 24-TSSOP spot stock

SN74LVC821APW 10-BIT BUS-INTERFACE FLIP-FLOP WITH 3-STATE OUTPUTS 24-TSSOP spot stock

Write your review

Other Products In The same category:

8In stock:
Can ship immediately
QUANTITY
All prices are in USD

SEND
RFQ