Free hotline:
+86 135 5637 6665
+852 2632 9637
Image shown is a representation only.
Exact specifications should be obtained from the product data sheet.
Hot-selling and scarce AH1809-P-A LOW SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH 3SIP spot stock
AH1809-P-A LOW SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH 3SIP spot stock
Product Descriptions
The AH1809 is a low sensitivity micropower Omnipolar Hall Effect switch IC . It is designed for battery powered consumer products, home appliances, and industrial equipment such smart e-meters . Based on two Hall Effect plates and a chopper stabilized architecture the AH1809 provides a reliable solution over the whole operating range . To support battery and low power applications the design has been optimized to operate over the supply range of 2.5V to 5.5V and consumes only 24µW with a supply of 3V.
The single open drain output can be switched on with either a North or South pole of sufficient strength . When the magnetic flux density perpendicular to the package (B) is larger than operate point (Bop), the output is switched on (pulled low). The output is turned off when B becomes lower than the release point (Brp). The output will remain off when there is no magnetic field .
The AH1809 is available in SC59, SOT553 and SIP-3L .
Product Features
• Omnipolar (North or South pole) Operation
• Low Sensitivity
• Single Open Drain Output
• Micropower Operation
• 2.5V to 5.5V Operating Range
• Chopper Stabilized Design Provides
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Stress
• Good RF Noise Immunity
• -40°C to +125°C Operating Temperature
• High ESD
• Small Low Profile SOT553 and Industry Standard SC59 and SIP-3L Packages
Product Applications
• Smart E-Meters
• Tamper Protection Switch
• Door, Lids and Tray Position Switch
• Proximity and Position Switches
• Level Detects
• On/Off Switch Digital Contact-Less Switch in Industrial and Consumer Products
Product Specifications
| Attribute | Attribute value |
| ANSM-Part# | ANSM-AH1809-P-A |
| Category | Sensors, Transducers |
| Magnetic Sensors | |
| Switches (Solid State) | |
| Mfr | - |
| Packaging | Cut Tape (CT) |
| Tape & Box (TB) | |
| Part Status | Active |
| Function | Omnipolar Switch |
| Technology | Hall Effect |
| Polarization | North Pole, South Pole |
| Sensing Range | ±18.5mT Trip, ±17mT Release |
| Test Condition | -40°C ~ 125°C |
| Voltage - Supply | 2.5V ~ 5.5V |
| Current - Supply (Max) | 6mA |
| Current - Output (Max) | 2.5mA |
| Output Type | Open Drain |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Mounting Type | Through Hole |
| Supplier Device Package | 3-SIP |
| Package / Case | 3-SIP, Formed Leads |
| Base Product Number | AH1809 |
Product Photos


For more product information, please download the PDF