Free hotline:
+86 135 5637 6665
+852 2632 9637
Image shown is a representation only.
Exact specifications should be obtained from the product data sheet.
Hot-selling and scarce OPA693IDBVT Ultra-Wideband, Fixed Gain Video BUFFER AMPLIFIER with Disable SOT23-6 spot stock
OPA693IDBVT Ultra-Wideband, Fixed Gain Video BUFFER AMPLIFIER with Disable SOT23-6 spot stock
Product Descriptions
The OPA693 provides an easy to use, broadband,fixed gainbuffer amplifier . Depending on the external connections, theinternal resistor network may be used to provide either afixed gain of +2 video buffer or a gain of ±1 voltage buffer .Operating on a low 13mA supply current, the OPA693 offersa slew rate (2500V/µs) and bandwidth (> 700MHz) normallyassociated with a much higher supply current . A new outputstage architecture delivers high output current with a minimalheadroom and crossover distortion . This gives exceptionalsingle-supply operation . Using a single +5V supply, theOPA693 can deliver a 2.5VPP swing with over 90mA drivecurrent and 500MHz bandwidth at a gain of +2. This combination of features makes the OPA693 an ideal RGB linedriver or single-supply undersampling Analog-to-Digital Converter (ADC) input driver .
The OPA693’s low 13mA supply current is precisely trimmedat 25°C . This trim, along with low drift over temperature,ensures lower maximum supply current than competingproducts that report only a room temperature nominal supplycurrent . System power may be further reduced by using theoptional disable control pin . Leaving this disable pin open, orholding it HIGH, gives normal operation . This optional disable allows the OPA693 to fit into existing video bufferlayouts where the disable pin is unconnected to get improvedperformance with no board changes . If pulled LOW, theOPA693 supply current drops to less than 170µA while theoutput goes into a high impedance state .This feature may beused for power savings .
The low gain stable current-feedback architecture used in theOPA693 is particularly suitable for high full-power bandwidthcable driving requirements . Where the additional flexibility ofan op amp is required, consider the OPA695 ultra-widebandcurrent feedback op amp . Where a unity gain stable voltagefeedback op amp with very high slew rate is required,consider the OPA690.
Product Features
● VERY HIGH BANDWIDTH (G = +2): 700MHz
● FLEXIBLE SUPPLY RANGE:
+5V to +12V Single Supply
±2.5V to ±6V Dual Supplies
● INTERNALLY FIXED GAIN: +2 or ±1
● LOW SUPPLY CURRENT: 13mA
● LOW DISABLED CURRENT: 120µA
● HIGH OUTPUT CURRENT: ±120mA
● OUTPUT VOLTAGE SWING: ±4 .1V
● SOT23-6 AVAILABLE
Product Applications
● BROADBAND VIDEO LINE DRIVERS
● MULTIPLE LINE VIDEO DA
● PORTABLE INSTRUMENTS
● ADC BUFFERS
● HIGH FREQUENCY ACTIVE FILTERS
● HFA1112 IMPROVED DROP-IN
Product Specifications
| Attribute | Attribute value |
| ANSM-Part# | ANSM-OPA693IDBVT |
| Category | Integrated Circuits (ICs) |
| Linear | |
| Amplifiers | |
| Video Amps and Modules | |
| Manufacturer | - |
| Packaging | Tape & Reel (TR) |
| Cut Tape (CT) | |
| Digi-Reel® | |
| Part Status | Active |
| Applications | Buffer |
| Number of Circuits | 1 |
| -3db Bandwidth | 1.4 GHz |
| Slew Rate | 2500V/µs |
| Current - Supply | 13 mA |
| Current - Output / Channel | 120 mA |
| Voltage - Supply, Single/Dual (±) | 5V ~ 12V, ±2.5V ~ 6V |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Supplier Device Package | SOT-23-6 |
| Base Product Number | OPA693 |
Product Photos

For more product information, please download the PDF