Hot-selling and scarce GS9029-CKDE3 Serial Digital Video Cable Driver IC PDSO16 spot stock

Product Descriptions

The  GS9029  is  a  second  generation  bipolar  integratedcircuit designed to drive four 75Ω co-axial cables .

The GS9029 features two pairs of complementary outputswhose  amplitude  is  controlled  within  ±7 .5%.  The  outputsignal  levels  are  also  adjustable  from  50mVp-p  up  to1000mVp-p   with   little   change   in   other   performanceparameters . The amplitude of the output stage is varied byadjusting  the  R_SET  resistor  value .  The  patented  currentmode  outputs  ensure  superior  output  return  loss  andminimal over shoot . The rise/fall time circuitry allows widerange   operation   and   provides   symmetrical   balancedoutputs to reject power supply noise . In addition high outputisolation  ensures  that  the  cable  driver  outputs  are  notaffected  by  the  performance  or  status  of  other  outputs .Operational  with  input  amplitudes  as  low  as  80mV,  theGS9029 provides a robust serial interface .

The  GS9029  is  packaged  in  a  16  pin  narrow  SOIC  andoperates from a single +5 or -5 volt supply. Typical systempower consumption is 320mW which is 40% less than theGS9007 .

Product Features

•  SMPTE 259M compliant

•  four isolated outputs (two complimentary pairs),adjustable from 50mV-1000mV into 75Ω loads

•  operational from 143Mb/s to 540Mb/s and beyond

•  nominal 500ps rise/fall times

•  precise ±7.5% output amplitudes

•  40% system power reduction over GS9007

•  75Ω on-chip input termination resistors

•  input hysteresis

•  operational down to 80mV input amplitude

•  superior output isolation

•  "Bus Through" expansion port for fan out requirements

•  Pb-free and Green

Product Applications

4ƒsc,   4:2:2   and   4:4:4:4   serial   digital   video   co-axial transmission  interfaces  from  143  to  540Mb/s;    General purpose cable driving applications (co-axial cable or UTP).

Product Photos

For more product information, please download the PDF