Free hotline:
+86 135 5637 6665
+852 2632 9637
Image shown is a representation only.
Exact specifications should be obtained from the product data sheet.
Hot-selling and scarce AD8159ASVZ Quad Buffer Mux/Demux 100-TQFP-EP spot stock
AD8159ASVZ Quad Buffer Mux/Demux 100-TQFP-EP spot stock
Product Descriptions
The AD81591 is an asynchronous, protocol agnostic, quad-lane2:1 switch with 12 differential PECL-/CML-compatible inputs and12 differential CML outputs. The operation of this product isoptimized for NRZ signaling with data rates of up to 3.2 Gbpsper lane.Each lane offers two levels of input equalization and fourlevels of output pre-emphasis .
The AD8159 consists of four multiplexers and four demultiplexers,one per lane.Each port is a four-lane link, and each lane runs up toa 3.2 Gbps data rate,independent of the other lanes.The lanes areswitched independently using the four select pins, SEL[3:0]; eachselect pin controls one lane of the port . The AD8159 has lowlatency and very low lane-to-lane skew.
The main application of the AD8159 is to support redundancyon both the backplane side and the line interface side of a seriallink . The device has unicast and bicast capability; therefore, itcan be configured to support either 1 + 1 or 1:1 redundancy.
The AD8159 supports reversing of the output and input pinson one of its ports, which helps to connect two ASICs withopposite pinouts .
The AD8159 is also used for testing high speed serial links byduplicating incoming data and sending it to the destination portand to the test equipment simultaneously.
Product Features
Port level 2:1 mux/1:2 demux
Each port consists of 4 lanes
Each lane runs from dc to 3.2 Gbps, independent of the other lanes
Compensates over 40 inches of FR4 at 3.2 Gbps through
2 levels of input equalization or 4 levels of output pre-emphasis
Accepts ac- or dc-coupled differential CML inputs
Low deterministic jitter, typically 20 ps p-p
Low random jitter, typically 1 ps rms
BER < 10−16
On-chip termination
Reversible inputs and outputs on one port
Unicast or bicast on 1:2 demux function
Port level loopback capability
Single lane switching capability
3.3 V core supply
Flexible I/O supply down to 2.5 V
Low power, typically 1 W in basic configuration
100-lead TQFP_EP
−40°C to +85°C operating temperature range
Product Applications
Low cost redundancy switch
SONET OC-48/SDH-16 and lower data rates
XAUI (10 gigabit Ethernet) over backplane
Gigabit Ethernet over backplane
Fibre Channel 1.06 Gbps and 2.125 Gbps over backplane
InfiniBand® over backplane
PCI Express (PCIe) over backplane
Product Specifications
| Attribute | Attribute value |
| ANSM-Part# | ANSM-AD8159ASVZ |
| Category | Integrated Circuits (ICs) |
| Logic | |
| Signal Switches, Multiplexers, Decoders | |
| Manufacturer | - |
| Series | XStream™ |
| Packaging | Tray |
| Part Status | Active |
| Type | Multiplexer/Demultiplexer |
| Circuit | 4 x 2:1 |
| Independent Circuits | 1 |
| Voltage Supply Source | Single Supply |
| Voltage - Supply | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP Exposed Pad |
| Supplier Device Package | 100-TQFP-EP (14x14) |
| Base Product Number | AD8159 |
Product Photos

For more product information, please download the PDF